FAQs • City of Universal City • CivicEngage

Do I need a permit for a street span banner?: Yes; the city has eight locations available for installation of street span banners. Locations may only be reserved by issuance of a permit by the city. More...

▼
Building/Permits

1. Address for City Hall: The City Hall is located at 2150 Universal City Blvd, Universal City, TX 78148. The main phone number is (210) 659-0333.

2. What building codes has Universal City adopted?: The city has adopted the International Codes as minimum standards for construction of both residential and commercial properties. For a list of adopted codes..
More...

3. What type of construction work requires building permits?: Most all construction work requires a permit; the only improvement that currently does not is painting and interior cosmetic work such as cabinets, wall paper and carpet. For a list of permit requirements ... More...

4. What building inspections are required?: The required inspections on a project depends on the type and extent of the project and may also include inspection by other departments such as fire, public works and health as may be necessary. For a list of inspections ... More...

5. Do I have to comply with deed restrictions and city codes?: Yes, if you live in a deed restricted subdivision you are required to contact your homeowners association for their requirements; and you must also comply with city code requirements as well. City code, if more restrictive, will supercede deed restriction requirements.

6. Is a sign permit required?: Yes; any installation, replacement or change to a new or existing sign requires a permit. Certain types of temporary signs do not. Registered sign contractors are required in most cases to obtain permits and perform the installations. Sign Ordinance 352 is available on MuniCode as Chapter 4-4 ... More...

7. Do I need a permit for a street span banner?: Yes; the city has eight locations available for installation of street span banners. Locations may only be reserved by issuance of a permit by the city. More...

8. How do I obtain a building permit?: Building permits for all contractors are available on the web site under the BUSINESS tab. Registered plumbers, electricians and HVAC contractors can fax in the permit applications to (210) 659-7062. Permits are typically ready for pick up in 2 to 3 hours. Permits that require a plan review should be brought to City Hall located at 2150 Universal City Blvd, Universal City TX 78148. For questions, call (210) 659-0333 ext 723.

9. I'm a homeowner, can I pull my own permit?: All electric, mechanical, and plumbing work must have permits pulled by a State licensed, City registered contractor. Homeowners cannot pull these permits. However, homeowners can pull permits for fences, roof work, and other small jobs. A short list of contractors who are licensed and registered in the City already is located in the Development Services folder of the Document Center. When in doubt, call (210) 659-0333 ext 723.

10. I'm a business/building owner, can I pull my own permits?: No. State law requires that all construction work on publically accessed facilities must be done by a General Contractor or other State licensed trade depending on the type of construction work being conducted. All contractors doing work in Universal City must be registered to work in the City of Universal City and pull permits for all types of work conducted.

11. Do I need a permit for a shed?: Yes, sheds do require a permit and inspections. Each area of the City has its own shed requirements for setbacks, height, size, and maximum lot coverage. Bring a copy of your site plan, and the plans/specification from the builder or home improvement center with you. Permit fees for sheds are based on the cost of the shed. Every residence is only allowed 1 accessory structure unless a variance is obtained prior to installation.

12. Who issues building permits?: Building permits are issued by the Development Services Department located at 2150 Universal City Blvd, Universal City TX 78148, M-F, 8:00 am to 5:00 pm. Questions can be directed to (210) 659-0333 ext 723.

13. Are permits required for a new fence?: Yes. Fence repair or replacement does require a permit and an inspection. Bring a copy of your site plan with you when obtaining the permit--hand drawn site plans will suffice. Cost of a fence permit is $85 and must be obtained before the work is begun. Homeowners can pull their own fence permits.